Machine Maintenance Workshop

Kursbeschreibung

Ensure your machine reaches your expected performance!

This three-day course is designed for machine maintenance personnel responsible for upkeep, troubleshooting, and preventive maintenance of injection molding machines and ancillary equipment. It is common in the industry that maintenance personnel are not trained to recognize how machine performance affects final part quality. The performance of the press is critical to a molder’s ability to deliver consistent parts. Maintenance personnel must understand how to identify and fix press performance concerns in order to optimize press tuning.

Kernthemen des Kurses

  • Screw and barrel measurement and documentation
  • Screw and barrel wear evaluation
  • Platen parallelism
  • Hydraulic systems: closed and open loop systems, variable displacement pumps, and proportional valves
  • Electric machines: servo and frequency drives
  • Testing for proper material dryer operation
  • Proper sizing of plant cooling system

Upon completion of this course, personnel should be able to conduct and evaluate the test procedures in the above. In addition to the tests performed the knowledge gained in the class will assist the student in finding root cause for poor machine performance.

Participants will be able to effectively communicate with production personnel in regards to machine maintenance issues and their impact on process repeatability and part quality.

Maintenance personnel will be able to evaluate machine capability in the following areas:

  • Load sensitivity
  • Velocity linearity,
  • Dynamic check ring repeatability
  • Static barrel and check ring repeatability
  • Hydraulic pressure response
  • Pressure linearity.

Course Length: 3 days

Kursvoraussetzungen

Public Classes – No prerequisite

In-Plant Classes – A functioning eDART System running Version 9 software must be available for use during the class. (Arrangements can be made for RJG to provide an eDART, but this must be prearranged with the trainer in advance)

Start DateEnd DateNameSpracheOrtOpen SeatsPreise
2021/11/022021/11/04Accelerated Tool Launch5$1,995.00Register
2021/09/212021/09/23Advanced eDART® Training0$1,095.00

Class is FULL
Join Waitlist

2022/02/012022/02/03Advanced eDART® Training5+$1,095.00Register
2021/09/282021/09/29CoPilot Schulung5+685.00Register
2021/10/192021/10/20CoPilot Schulung5+685.00Register
2021/11/162021/11/17CoPilot Schulung5+685.00Register
2021/11/302021/12/01CoPilot Schulung5+685.00Register
2021/12/082021/12/09CoPilot Schulung5+685.00Register
2021/10/192021/10/19Curve Interpretation5+399.00Register
2021/12/022021/12/02Curve Interpretation5+399.00Register
2021/10/072021/10/07Curve Interpretation5+399.00Register
2021/11/112021/11/11Curve Interpretation5+399.00Register
2021/11/182021/11/18Curve Interpretation5+399.00Register
2021/12/072021/12/07Curve Interpretation5+399.00Register
2021/10/122021/10/14DECOUPLED MOLDING® Workshop41,495.00Register
2021/11/092021/11/11DECOUPLED MOLDING® Workshop41,495.00Register
2021/12/142021/12/16DECOUPLED MOLDING® Workshop41,495.00Register
2021/10/122021/10/14Design for Manufacture5+£975.00Register
2021/09/302021/10/01eDART Schulung5+685.00Register
2021/10/052021/10/06eDART Schulung5+685.00Register
2021/11/092021/11/10eDART Schulung5+685.00Register
2021/11/182021/11/19eDART Schulung5+685.00Register
2021/10/192021/10/22Fundamentals of Systematic Injection Molding1$1,995.00Register
2021/10/192021/10/22Fundamentals of Systematic Injection Molding0$1,995.00

Class is FULL
Join Waitlist

2021/09/272021/09/30Fundamentals of Systematic Injection Molding41,390.00Register
2021/10/112021/10/14Fundamentals of Systematic Injection Molding01,390.00

Class is FULL
Join Waitlist

2021/11/222021/11/25Fundamentals of Systematic Injection Molding5+1,390.00Register
2021/12/132021/12/16Fundamentals of Systematic Injection Molding41,390.00Register
2021/11/022021/11/05Fundamentals of Systematic Injection Molding5$1,995.00Register
2022/02/082022/02/11Fundamentals of Systematic Injection Molding5+$1,995.00Register
2021/11/082021/11/11Fundamentals of Systematic Injection Molding5+£1,195.00Register
2021/09/212021/09/24Fundamentals of Systematic Injection Molding0$1,995.00

Class is FULL
Join Waitlist

2022/01/112022/01/14Fundamentals of Systematic Injection Molding5+$1,995.00Register
2021/09/272021/09/30High Performance Moulding5+£1,195.00Register
2021/12/132021/12/16High Performance Moulding5+£1,195.00Register
2021/09/272021/10/08Master Molder® I0$3,895.00

Class is FULL
Join Waitlist

2021/11/152021/11/26Master Molder® I3$3,895.00Register
2021/11/292021/12/10Master Molder® I0$3,895.00

Class is FULL
Join Waitlist

2021/10/252021/11/05Master Molder® I43,895.00Register
2021/11/222021/12/03Master Molder® I43,895.00Register
2021/11/082021/11/19Master Molder® I0$3,895.00

Class is FULL
Join Waitlist

2022/01/172022/01/28Master Molder® I1$3,895.00Register
2021/11/222021/12/03Master Molder® I5£3,765.00Register
2021/09/272021/10/08Master Molder® I0$3,895.00

Class is FULL
Join Waitlist

2021/11/082021/11/19Master Molder® I0$3,895.00

Class is FULL
Join Waitlist

2021/12/062021/12/17Master Molder® I0$3,895.00

Class is FULL
Join Waitlist

2022/02/072022/02/18Master Molder® I5+$3,895.00Register
2022/02/282022/03/11Master Molder® I5+$3,895.00Register
2021/11/012021/11/12Master Molder® II0$4,295.00

Class is FULL
Join Waitlist

2021/12/062021/12/17Master Molder® II1$4,295.00Register
2022/02/142022/02/25Master Molder® II5$4,295.00Register
2021/10/182021/10/29Master Molder® II1$4,295.00Register
2022/01/172022/01/28Master Molder® II5+$4,295.00Register
2021/10/052021/10/08Materials Technology5+£1,105.00Register
2021/12/312021/12/31Math for Molders - eLearning$395.00Register
2021/12/312021/12/31Math for Molders - eLearning$395.00Register
2021/12/312021/12/31Math for Molders - eLearning$395.00Register
2021/09/212021/09/23Module 1 - Melt Preparation and Plasticisation5+£880.00Register
2021/11/162021/11/18Module 1 - Melt Preparation and Plasticisation5+£880.00Register
2021/11/022021/11/04Module 2 - Process Control5+£880.00Register
2021/11/092021/11/11Mold Design for Injection Molding5+£975.00Register
2021/11/302021/12/02Mold Design for Injection Molding5+$1,895.00Register
2022/02/222022/02/24Mold Design for Injection Molding5+$1,895.00Register
2021/11/232021/11/26Online eDART® Training5+£625.00Register
2021/10/112021/10/15Online Fundamentals of Systematic Injection Molding5+£1,195.00Register
2021/12/062021/12/10Online Fundamentals of Systematic Injection Molding5+£1,195.00Register
2021/12/132021/12/17Online Fundamentals of Systematic Injection Molding5+$1,995.00Register
2021/10/192021/10/22Online Injection Molding Essentials5+$795.00Register
2021/09/282021/10/01Online Injection Molding Essentials5+$795.00Register
2021/10/192021/10/21Online Intro to Part Design5+£975.00Register
2021/10/262021/10/26Online Introduction to Injection Moulding5+£410.00Register
2021/09/282021/09/30RJG Qualified Trainer Forum5+$1,995.00Register
2021/10/262021/10/28Systematic Molding for Liquid Silicone Rubber0$1,495.00

Class is FULL
Join Waitlist

2021/11/162021/11/17Systematic Molding for Professionals41,086.98Register
2021/10/052021/10/06Systematic Molding for Professionals5+990.00Register
2021/10/202021/10/21Systematic Molding for Professionals5+990.00Register
2021/11/302021/12/02Systematic Molding5+1,095.00Register